Smart power measurement with PowerCalc in Home Assistant (2024)

Expected Reading Time: 7 minutes

In today's world, where energy efficiency and sustainability are becoming increasingly important, it is crucial to accurately understand and control the energy consumption of our household appliances. This is where the integration of PowerCalc into Home Assistant comes into play, a powerful tool that bridges the gap in energy measurement, especially for appliances that are not normally easy to measure.

From light bulbs and media players to smart sockets without built-in energy metering, PowerCalc offers an elegant solution for monitoring and analyzing their consumption. By using pre-defined templates for a wide range of devices from well-known manufacturers such as Philips, Amazon, Sonos, Osram and many more, PowerCalc makes it quick and easy to integrate these devices into your smart home system. This not only enables a deeper understanding of your own energy consumption, but also the opportunity to save costs and reduce your own electricity consumption through targeted measures.

Table of Contents

PowerCalc: An overview

PowerCalc is a custom component for Home Assistant that aims to calculate the estimated power consumption of lights and other household appliances.

The advantages of PowerCalc

  1. Consumption calculationDetermining the power consumption of connected devices based on their status (on/off, brightness, color, etc.).
  2. Energy monitoringIntegration with Home Assistant makes it possible to monitor energy consumption over time, which can be useful for efficient energy management and cost savings.
  3. Support for multiple device typesThe plugin supports a wide range of devices, from smart light bulbs to other smart home devices such as Alexa devices.
  4. User-defined configurationsUsers can define specific settings for their devices to obtain more accurate consumption data.
  5. Measure time periodsDevices or groups of devices can receive utility meters which, for example, calculate the consumption per day, per week or per month without any configuration of their own.

PowerCalc lives from the Home Assistant community, as it is constantly adding new devices and their respective energy values so that they are directly available as templates. However, you can also enter values manually and add virtually anything that can be accessed in Home Assistant.

Application examples

If you add a lamp that already exists as a template for a virtual sensor, as shown in the following image, then the settings look like this: you only have to select the device and the corresponding template for the model and then make adjustments regarding any desired utility meter, certain activation functions or multiplication factors.

With PowerCalc, we not only have the option of measuring devices with an energy meter in Home Assistant, but also other electronic devices/objects whose values we know. We can choose between already stored templates (Virtual power (library), independently filled with values (Virtual power (manual) or real, already existing, energy sensors (Energy from real power sensor) choose.

In addition, we can even group energy sensors (Group), which is very useful for several lamps at a dining room table, for example. You still need a separate energy sensor for each lamp, but you can access the aggregated values of the group directly in dashboards and evaluations. Finally, you can also create a sensor for the daily energy of sensors of your choice (Daily energy).

Once you have set up your lamps or sockets without a measuring function, the whole thing looks like the picture below. PowerCalc simply adds the energy sensors as entities to existing devices and adapts perfectly.

For more detailed information, you can go directly to the GitHub page from PowerCalc. The Documentation I hereby also provide a link.

Last updated on 13. September 2024 at 02:30 - Image source: Amazon Affiliate Program. All statements without guarantee.

Installation of HACS and integration of PowerCalc in Home Assistant

Step 1: Installing HACS in Home Assistant

Home Assistant Community Store (HACS) is a custom add-on for Home Assistant that provides access to a variety of custom integrations and plugins developed by the community. How to install HACS:

  1. Check requirements: Make sure that your Home Assistant is ideally up to date.
  2. Download Execute script: Open a terminal for the Docker container version or the core version.
    • Docker: Dial into the container with: docker exec -it homeassistant bash or (similar)
    • Core: Switch to the user who is running Home Assistant
    • Execute the following command for both variants:
      wget -O - https://get.hacs.xyz | bash -
  3. Restarting the Home Assistant: After the files have been copied, restart Home Assistant.
  4. Integrate HACS into Home Assistant: In the Home Assistant interface, go to "Configuration" > "Integrations" > "Add" and search for HACS. Add it and enter your GitHub token if prompted.

For the supervised version, please refer to the Documentation of HACS itself to read about the installation.

Step 2: Add PowerCalc integration via HACS

Once HACS is installed, you can simply add PowerCalc:

  1. Open HACS: Go to HACS in the Home Assistant interface.
  2. Search for integrationClick on "Integrations" and use the search function to search for "PowerCalc".
  3. Install PowerCalcFind PowerCalc in the list and click on "Install". This will add the integration to your Home Assistant.
  4. Restarting the Home Assistant: Start Home Assistant again to apply the changes.
  5. Configure PowerCalcAfter restarting, you can set up and customize PowerCalc via "Configuration" > "Integrations" in Home Assistant.

Conclusion

With these steps, you have successfully installed HACS in your Home Assistant and added the PowerCalc integration. This powerful combination opens up a world of additional features and customizations that have been and are being developed by the Home Assistant community. More blog posts and videos on useful integrations to follow. If you don't want to miss out, subscribe to my YouTube channel!

YouTube video implementation

Conclusion

The strength of PowerCalc lies not only in its ability to measure and monitor consumption, but also in its simple integration and configuration through the use of templates for a large number of devices from well-known manufacturers. This makes it much easier for users to get started and use the application. In addition, the ability to enter manual values offers enormous flexibility, making PowerCalc a versatile tool that can be adapted to almost any smart home system.

The installation of PowerCalc via HACS also demonstrates how closely and productively the Home Assistant community works together to develop and maintain such useful tools. This kind of community involvement ensures that PowerCalc is constantly being expanded and improved, making it a dynamic and future-proof tool.

In short, PowerCalc is an asset for any Home Assistant user who wants to make their home smarter and more energy efficient. It provides a deeper insight into energy consumption and offers the opportunity to save energy while helping to protect the environment. PowerCalc is therefore a perfect example of how technology can be used to make our lives more sustainable and efficient.

Interested, but lack time or knowledge?

No problem. Contact me and we will discuss your requirements. No matter if business or private.

Contact

The display of the products was implemented with the affiliate-toolkit plugin.

Smart power measurement with PowerCalc in Home Assistant (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Sen. Emmett Berge

Last Updated:

Views: 5345

Rating: 5 / 5 (60 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Sen. Emmett Berge

Birthday: 1993-06-17

Address: 787 Elvis Divide, Port Brice, OH 24507-6802

Phone: +9779049645255

Job: Senior Healthcare Specialist

Hobby: Cycling, Model building, Kitesurfing, Origami, Lapidary, Dance, Basketball

Introduction: My name is Sen. Emmett Berge, I am a funny, vast, charming, courageous, enthusiastic, jolly, famous person who loves writing and wants to share my knowledge and understanding with you.